Conference Schedule
Program Overview | Program Search
31-1
IGTI Scholar Lecture (Lecture Session)
No.of Papers: 1
Monday, May 14, 2007
09:45 AM to 11:45 AM
1-1
Product Lifecycle Management: Design Optimization and Process Automation (Technical Session)
No.of Papers: 4
2-2
Environmental and Thermal Barrier Coatings (Technical Session)
3-1
Liquid Biofuels Utilization (Technical Session)
4-15
Fuel Flexibility - Fundamental Combustion (Technical Session)
5-6
Gas Path Analysis Tutorial (Tutorial Session)
6-3
Fuel Cell-Gas Turbine Hybrid Systems III (Technical Session)
7-3
Education Strategies & Tools III (Technical Session)
10-1
Advanced Heat Exchangers (Technical Session)
10-25
Film Cooling IX (Technical Session)
12-1
Seals I (Technical Session)
13-1
Design and Performance of Heat Recovery Steam Generators (Technical Session)
No.of Papers: 3
14-10
Modeling and Simulation in Process Development (Panel Session)
No.of Papers: 0
15-1
Applications (Technical Session)
17-5
Field Testing and Performance Monitoring (Panel Session)
17-11
Compressor Operation (Technical Session)
18-1
Characteristics of Nonlinear Dynamics (Technical Session)
19-1
Fatigue, Fracture and Life Prediction I (Technical Session)
21-4
Rotordynamic Analysis I (Technical Session)
24-7
Tip Clearance Flow Effects I (Technical Session)
25-1
Design Methods (Technical Session)
26-2
Radial Turbomachinery Aerodynamics IIa (Technical Session)
28-1
Fan Noise/Jet Noise (Technical Session)
03:15 PM to 05:15 PM
1-2
Modeling and Simulation I (Technical Session)
2-3
Development and Testing of Ceramic Components (Technical Session)
4-1
Advanced Combustor Concepts (Technical Session)
4-7
Combustion Lean Blowout (Technical Session)
5-4
Topics in Gas Path Analysis I (Technical Session)
6-4
CO2 Abatement I (Technical Session)
7-1
Education Strategies & Tools I (Technical Session)
8-2
Advanced GT Systems and Development (Technical Session)
10-11
Internal Heat Transfer IV (Technical Session)
10-14
Experimental Methods (Technical Session)
No.of Papers: 2
11-1
Transition in Separation Bubbles (Technical Session)
13-10
Gas Turbine Inlet Cooling Technologies (Panel Session)
14-14
Protection of Superalloys in Gas Turbines; History and some Strategies (Lecture Session)
16-1
Microturbine & Small Turbomachinery System Design I (Technical Session)
17-1
Gas Turbine Product Introductions and Upgrades (Panel Session)
18-2
Experimental and Numerical Life Assessment (Technical Session)
19-2
Fatigue, Fracture and Life Prediction II (Technical Session)
21-8
Bearings, Seals and Damper Dynamics I (Technical Session)
22-4
Turbomachinery: General Interest (Technical Session)
24-8
Tip Clearance Flow Effects II (Technical Session)
26-5
Radial Turbomachinery Aerodynamics IIb (Technical Session)
32-3
Combustor Liner Cooling (Technical Session)
Tuesday, May 15, 2007
08:00 AM to 10:00 AM
1-3
Aircraft Engine - General Topics (Technical Session)
4-9
Particulate Emissions (Technical Session)
4-17
Combustion Instabilities - Model Development II (Technical Session)
5-17
Smart Sensors (Panel Session)
6-5
CO2 Abatement II (Technical Session)
8-3
OEM New GT Technology Challenges (Technical Session)
10-13
Impingement Cooling (Technical Session)
10-19
Film Cooling III (Technical Session)
13-3
Wet Compression/High Fogging for Gas Turbines (Technical Session)
14-12
Gas Turbine Component Repair Technology (Tutorial Session)
15-5
Gas Turbine Fleet Management (Panel Session)
17-3
Oil & Gas Turbomachinery Maintenance Practices (Panel Session)
19-3
Fatigue, Fracture and Life Prediction III (Technical Session)
20-2
Turbomachinery Aeroelasticity (Technical Session)
21-5
Rotordynamics Analysis II (Technical Session)
24-1
Design, Analysis and Validation I (Technical Session)
25-4
Secondary Flows/Endwall Contouring (Technical Session)
27-1
Turbine Applications I (Technical Session)
29-3
Unsteady Flows in Axial Compressors (Technical Session)
32-4
Effect of Combustor Exit Conditions on Turbine Heat Transfer (Technical Session)
10:15 AM to 12:15 PM
1-7
Modeling and Simulation II (Technical Session)
4-16
Combustion Instabilities - Model Development I (Technical Session)
4-18
Combustion Instabilities - Measurements I (Technical Session)
5-14
Instrumentation I (Technical Session)
6-8
Novel Cycles II (Technical Session)
9-1
Responding to New Regulatory Challenges - CO2 limitations, New Emission Measurement Technologies, and Hazard/Risk Assessments (Technical Session)
10-12
Internal Heat Transfer V (Technical Session)
10-22
Film Cooling VI (Technical Session)
13-2
New Developments in Gas Turbine Technologies (Technical Session)
14-6
Coating Evaluation & Life Prediction (Technical Session)
14-8
New Alternate Source Parts (Panel Session)
15-2
Design and Development 1 - Aux Engine or Support Systems (Technical Session)
16-2
Microturbine Heat Exchanger Design and Development Considerations I (Technical Session)
17-9
Introduction to Rotordynamics (Tutorial Session)
19-6
Friction Damping Devices (Technical Session)
20-4
Forced Response Phenomena (Technical Session)
21-1
Foil and Gas Bearings I (Technical Session)
24-3
Design, Analysis and Validation II (Technical Session)
24-6
Loss Generation and Reduction Mechanism (Technical Session)
25-10
General Interest I (Technical Session)
27-7
Optimization I (Technical Session)
29-7
Unsteady Flow Modelling and Control (Technical Session)
23-1
Probabilistic Methods Development (Technical Session)
02:30 PM to 05:00 PM
1-4
Aircraft Engine Testing (Technical Session)
No.of Papers: 5
2-1
Life Prediction and Materials Assessment (Technical Session)
No.of Papers: 6
3-3
Performance of Biomass Fueled Power Plants (Technical Session)
3-5
Co-firing and Clean Coal Technologies (Technical Session)
4-10
Premixed Flames (Technical Session)
4-13
Fuel Flexibility - Combustion Systems (Technical Session)
5-10
Engine Diagnostics I (Technical Session)
5-16
Instrumentation II (Technical Session)
6-11
Cycle Optimisation I (Gas Perfomance Modeling) (Technical Session)
8-8
CO2 Compression Technologies and Opportunities in Fossil Fueled Power Plants (Panel Session)
10-9
Internal Heat Transfer II (Technical Session)
10-20
Film Cooling IV (Technical Session)
12-5
Special Topics (Technical Session)
13-8
Gas Turbine Modeling and Optimization (Technical Session)
14-7
Gas Turbine Airfoil Repair Strategies for Reduced Life Cycle Costs (Panel Session)
16-3
Microturbine & Small Turbomachinery Component Design I (Technical Session)
17-2
Subsea Compression Technology (Panel Session)
19-4
Vibration of Bladed Disks (Technical Session)
21-2
Foil and Gas Bearings II (Technical Session)
25-2
Unsteady Flow and Interaction (Technical Session)
26-1
Radial Turbomachinery Aerodynamics I (Technical Session)
27-5
CFD Methods I (Technical Session)
Wednesday, May 16, 2007
1-8
Product Lifecycle Management: The Elements of System/Sub-system and Cost (Technical Session)
4-19
Combustion Instabilities - Measurements II (Technical Session)
4-22
Combustion Modeling - Sprays and Combustion (Technical Session)
5-9
Monday, May 14, 2007